balun amplifier

balun amplifier
<el> ■ Symmetrierverstärker m

English-german technical dictionary. 2013.

Игры ⚽ Поможем решить контрольную работу

Schlagen Sie auch in anderen Wörterbüchern nach:

  • Balun — Pair of AC E 120 Ohm twisted pair (Krone IDC) to 75 Ohm coaxial cable balun transformers. Actual length is about 3cm …   Wikipedia

  • Dipole antenna — A schematic of a half wave dipole antenna connected to an unbalanced coaxial cable. Better practice is to connect the balanced dipole to the unbalanced line with a balun. A dipole antenna is a radio antenna that can be made of a simple wire, with …   Wikipedia

  • Balanced audio — is a method of interconnecting audio equipment using impedance balanced lines. This type of connection is very important in sound recording and production because it allows for the use of long cables while reducing susceptibility to external… …   Wikipedia

  • Radio transmitter design — In plate modulation systems the voltage delivered to the stage is changed. As the power output available is a function of the supply voltage, the output power is modulated. This can be done using a transformer to alter the anode (plate) voltage.… …   Wikipedia

  • Antenna (radio) — Whip antenna on car …   Wikipedia

  • DI unit — A DI unit, DI box, Direct Box, or simply DI (variously claimed to stand for direct input, direct injection or direct interface), is a device typically used in recording studios to connect a high impedance, line level, unbalanced output signal to… …   Wikipedia

  • Transformer types — Circuit symbols Transformer with two windings and iron core. Step down or step up transformer. The symbol shows which winding has more turns, but not usually the …   Wikipedia

  • Transformer — This article is about the electrical device. For the toy line franchise, see Transformers. For other uses, see Transformer (disambiguation). Pole mounted distribution transformer with center tapped secondary winding. This type of transformer is… …   Wikipedia

  • Impedance matching — In electronics, impedance matching is the practice of designing the input impedance of an electrical load (or the output impedance of its corresponding signal source) to maximize the power transfer and/or minimize reflections from the load.… …   Wikipedia

  • Lecher lines — are a form of parallel conductor that can be used at UHF for creating resonant circuits. They are used at frequencies between HF/VHF where lumped components are used, and UHF/SHF where resonant cavities are more practical. Ernst Lecher of Vienna …   Wikipedia

  • Liste elektrischer Bauelemente — Dieser Artikel listet elektrische beziehungsweise elektronische Bauelemente (auch Bauteile genannt) auf, die man für Schaltungen in der Elektrotechnik beziehungsweise Elektronik benötigt. Verschiedene elektronische Bauelemente Inhaltsverzeichnis …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”